The finished floor shall be protected and heavy traffic shall be avoided for approximately 28 days.
Hardener Color Choices









B-VER HARDENER BV29
❚ Description
❚ FUNCTIONS
B-VER BV29 Natural Grey Hardener is a ready to use dry silica quartz mineral aggregate, suitable for finishing and hardening over freshly floated and leveled concrete flatwork.
B-VER BV29 Natural Grey Hardener is suitable for both interior and exterior and where areas require additional wear resistance such as:-
● Car park/entrance of Bungalows
● Main entrance of Hotels and Condominium
● Swimming Pool Deck
● Pavement Walks
● Warehouse Pavement
❚ MATERIALS COMPOSITION
❚ packaging
B-VER BV29 Natural Grey Hardener consists of hard wearing silica quartz mineral of property sizes and graded aggregate, dispersing agents, strength promoter and cement binder.
B-VER BV29 Natural Grey Hardener is packed in 40 Kg/bag.
❚ Shelf life
❚ properties
Under normal conditions and kept dry the shelf life of the surface hardener is at least 6 months from the date of manufacture.
● Compressive strength at 28days:65n/mm
● Abrasion resistance is 200% great than plain concrete
● Hardener of aggregate is Moh’s scale 7
❚ rate of use
❚ protection
3 to 4kg/m2
The Contractor or principal shall take necessary steps to protect the finished floor from damage by other trades.
❚ Application
After the concrete has been screed, consolidate and further level by bull float and any free water has evaporated or been removed, the surface should be floated by hand or bull floated. Immediately following this floating operation, shake the B-VER Natural Grey Hardener by hand over the surface.
The first application of the B-VER Natural Grey Hardener should use about 2/3 of the total amount needed. The dry shake material will absorb some moisture from the freshly prepared concrete and should then be thoroughly floated into the surface, preferably by a bull float. Immediately after this, the remainder of the specified amount of the B-VER Natural Grey Hardener should be distributed evenly over the surface at right angles to the previous application. This should be thoroughly floated. A mechanical power float machine should be used to produce a smooth, dense and level concrete surface. Final troweling is best done by hand.
B-VER CONSTRUCTION SDN BHD
© 2025 by B-Ver Construction Sdn Bhd. All Rights Reserved.
Address:
No 10-1, Lorong Batu Nilam 20B, Bandar Bukit Tinggi 2. 41200 Klang, Selangor.